Atlas Development Group ADG Premium Unprimed Brass Rifle Cartridge Cases

ADG Premium brass was designed not only for consistency, but for durability. One of the ways we accomplished this was adding material to the case in specific areas to strengthen it. With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower charge weights to achieve the same pressures and velocities due to the reduced volume inside the brass. We recommend using a reputable load data source and working up from their recommended minimum starting loads. Failure to reduce charge weights established using other manufacturers brass will likely result in higher pressures and velocities while using ADG Premium brass and may result in unsafe pressure levels. We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Specifications:.22 Creedmoor:6mm Creedmoor:6.5mm Creedmoor:6.5mm Remington Short Action Ultra Mag:6.5mm PRC:.260 Remington:.28 Nosler:7mm PRC:7mm Rem Mag:7mm Remmington Short Action Ultra Mag:.300 Rem Ultra Mag.300 PRC:.300 Norma Magnum:.30 Nosler:.308 Winchester:.338 Lapua:.338 Remington Ultra Mag:.338 Edge:.375 Remington Ultra Mag:

See shipping info